Factory Direct Upgraded Replacement Gas Valve (Robertshaw)
700 Series bleed gas diaphragm valves feature: automatic pilot valve,
bleed gas operator, inlet and outlet screens, manual "gas cock" valve, pilot
adjusting key, pilot gas filter and pressure regulator (optional by model).
Regulated models offer the additional feature of "straight line" pressure regulation
allowing application of the 700 diaphragm gas valves to a wide
range of capacity requirements without regulator readjustment. Minimum
application for regulated models is 10% of capacity shown in the chart
below, except high capacity models (1 x 1) which require a minimum of
200,000 Btu for proper regulation.
These valves are most commonly used in commercial cooking applications
in conjunction with the 4290 (GS) gas controls (see Cooking Controls section).
NOTE: The 700-800 Series Bleed Gas Valve Operators will not function
properly if installed on a "normal" 700 Series Gas Valve body, i.e. hydraulic,
24 volt, etc.
Pressure regulator factory set at 3.5" W.C.
Pilot outlet 1/4" tubing
Bleed port outlet(s) 1/4" tubing
Gas cock dial markings off-pilot-on
Maximum ambient temperature 175
Maximum inlet pressure 14" W.C. (1/2 PSI)
Pressure Regulator Setting: None
Slow Opening Feature: No
Reducer Bushings Included: None
Replaces Part Numbers:700-881, 7000AMSGO, 7000AMSG0, CAR700881..