MOTOR,1HP,D/D BLOWER
Application High Efficiency Performance on Furnace Blowers and Other Air-over Shaft-mounted Fan and Blower Equipment
* IMPORTANT!!
PLEASE NOTE: All PSC Motors are design to be used with an external capacitor. The Capacitor operates in the Motor Circuit continuously. It is commonly referred to as a run capacitor. The Run Capacitor is designed to keep a constant and even flow of power going to the Motor. The Run Capacitor is sold separately. * Order New Run Capacitor Part Number: CAP20370
Direct Drive Blower Motor, Permanent Split Capacitor, Open Air-Over, 1 HP, 1075 RPM, Number of Speeds 4, 115, Full Load Amps 11.8, 48YZ NEMA Frame, Body Dia 5 5/8 In, Service Factor 1.00, 60 Hz, Universal Mounting, All-Angle Sleeve Bearings, Thermal Protection Auto, CW/CCW Rotation, Shaft Diameter 1/2 In, Shaft Length 6 In, Capacitor Required 2GE83, Ambient 40 C, Insulation Class B, Ring to Ring Center 7 In, Length Less Shaft 7 7/16 In
Item Motor
Type Direct Drive Blower
Motor Type Permanent Split Capacitor
Enclosure Open Air-Over
HP 1
Nameplate RPM 1075
Voltage 115
NEMA/IEC Frame 48YZ
Full Load Amps 11.8
Service Factor 1.0
Hz 60
Ambient (C) 40
Insulation Class B
Number of Speeds 4
Mounting Universal
Bearings All-Angle Sleeve
Thermal Protection Auto
Rotation Reversible: CW/CCW
Efficiency Group High
Body Dia. (In.) 5 5/8
Length Less Shaft (In.) 7 7/16
Shaft Dia. (In.) 1/2
Shaft Length (In.) 6
Capacitor Required: Yes
Duty Continuous air-over
Ring to Ring Center (In.) 7
Replaces Motor Part Numbers:
CAR3LU91G