1/2 HP 208/230 Volt 1075 RPM 1-Speed Factory Direct Replacement Condenser Fan Motor (Carrier, BDP)
OEM Replacement Motor, Permanent Split Capacitor, Open Air-Over, 1/2 HP, 1075 RPM, Length Less Shaft 8 1/4 In, 208-230olts, 4.0-4.0 Full Load Amps, 48Y NEMA Frame, Body Diameter 5 5/8 In, Thermal Protection Auto, Band Mounting, Number of Speeds 1, Ambient 60 C, Shaft Diameter 1/2 In, Shaft Length 4 In, Service Factor 1.0, Ball Bearings, CWLE Rotation, Insulation Class B.
Description:
Item: Condenser Fan Motor
Motor Type: Permanent Split Capacitor
Enclosure: Open Air-Over
HP: 1/2
Nameplate RPM: 1075
Voltage: 208-230
Full Load Amps: 4.0-4.0
NEMA/IEC Frame: 48Y
Service Factor: 1.0
Hz: 60
Mounting: Band
Bearings: Ball
Thermal Protection: Auto
Rotation: CWLE
Insulation Class: B
Ambient (C): 60
Number of Speeds: 1
Phase: Single
Shaft Dia. (In.): 1/2
Shaft Length (In.): 4
Body Dia. (In.): 5 5/8
Length Less Shaft (In.): 8 1/4
Application: Condenser Fan
* IMPORTANT!!
PLEASE NOTE: Replace the Run Capacitor EVERY TIME the Motor is replaced. All PSC Motors are design to be used with an external capacitor. The Capacitor operates in the Motor Circuit continuously. It is commonly referred to as a run capacitor. The Run Capacitor is designed to keep a constant and even flow of power going to the Motor. The Run Capacitor is sold separately. * Order New Run Capacitor Part Number: P291-0753
Replaces Part Numbers:
MOTHC445L230
HC44VL851
HC44SE230
38AB660029
HC44SL230
HC44ME700
38AB500811
HC44SL230
HC44MX230
48DA680071
03132
HC445L230
CAR3M610
CARHC44SL230
CAR4UY53
Used In Equipment Model Numbers: