STOP CONDENSATION OVERFLOW! Factory Direct Solid State Condensation Overflow Wet Switch
A solid state control designed to prevent flooding, damage to carpets, walls, ceilings, etc..
What is the Wet Switch
The Wet Switch is a solid state device designed to detect the presence of condensate water overflow.
The Wet Switch is normally placed into the secondary drain pan- a normally dry pan. If the primary drain
pan fails, condensate water will overflow into the secondary drain pan. Upon sensing moisture, the Wet Switch
will turn the system off (typically the cause of the condensing water) to help prevent damage to carpets, walls
woodwork, ceilings, and other property.
•Stainless Steel Sensor Array
•Solid State Electronics
•Epoxy Encapsulated Electronics
•Double Throw Relay
•Standard 24 VAC Control
•Multiple Unit Connectivity
The Wet Switch is designed to interrupt the operation of cooling systems. However, it is a water activated switch, and can be used in a variety of other applications.
A high tech polymeric fiber quickly draws water into the sensor array using proven capillary technology
Integral feet raise the hydrophilic pad and sensor array off the drain pan slightly to prevent nuisance tripping, and pan corrosion (metal pans only) from interfering with the sensor array.
STAINLESS STEEL SENSOR ARRAY
A high tech array of multiple stainless steel sensors detects even a minimal amount of water drawn into the hydrophilic pad.
Thius technology is packed into a 3-5/8" diameter by 1-1/4" high cylinder. Furnished complete with 5-conductor 22AWG stranded cable, 6' long.
SOLID STATE ELECTRONICS
Proven electronics prevent mechanical failure in an aggressive operating environment.
MULTIPLE UNIT CONNECTIVITY
Multiple unit connectivity allows for multiple Wet Switches to be connected in series to adequately cover large drain pan areas.
DOUBLE THROW RELAY
Allows for wiring to interrupt system and to sound an alarm (by others) when moisture is detected.
Replaces Part Numbers: