Taupe 2 Heat/1 Cool Stage Electronic Heat Pump Thermostat with manual changeover and L,W2,E,B,O,Y,W1,R,C,G terminals (Honeywell)
Electronic Thermostats provide temperature control for 24V heating-cooling systems, including multistage heat pump systems, with manual changeover from heat to cool.
• Attractive styling complements any decor.
• Ease-of-use means fewer questions and increased satisfaction.
• Large display for quick, easy readability.
• Keys are located by the display for easy access.
• Fan and system switches are located on the lower edge to eliminate accidental setting changes.
• Easy installation, setup and self-test saves installer time.
• Manual changeover from heat to cool eliminates unexpected system operation.
• 2 stage heat, 1 stage cool heat pumps.
• Degree F or C temperature display for added model flexibility.
• Selectable heating cycle rate for a variety of applications.
• Cooling cycle rate is fixed (3 cph), the standard setting for compressors, for speedy installation.
• Setpoints are permanently held in memory (no batteries used) and retained during power outages.
Description Taupe 2 Heat/1 Cool Stage Electronic Heat Pump Thermostat with manual changeover and L,W2,E,B,O,Y,W1,R,C,G terminals
Application Heat Pumps
Stages 2 Heat/1 Cool
Power Method Hardwired
Terminal Designations L, W2, E, B, O, Y, W1, R, C, G
Switch Positions (Fan) AUTO-ON
Switch Positions (System) OFF-COOL-HEAT-EM. HEAT
Switch Type Electronic
Accuracy (F) 1 F
Accuracy (C) 0.5 C
Dimensions (in.) 3 1/2 in. high x 5 1/2 in. wide x 1 3/16 in. deep
Dimensions (mm) 89 mm high x 140 mm wide x 55 mm deep
Setting Temperature Range (F) 40 F to 99 F
Setting Temperature Range (C) 4 C to 37 C
Interstage Differential Temperature (F) 1 to 1.5 F Multistage models only
Interstage Differential Temperature (C) .5 to .8 C Multistage models only
Electrical Ratings 18 to 30 Vac
Frequency 60 Hz;50 Hz
Cycles per Hour Adj. 1,3,4,5,6,9,12
Currents (Cooling) 0.02A to 1.5A running; 7.5A inrush
Currents (Heating) 1st stage 0.02A to 1.5A running 7.5A inrush; 2nd stage .02 to 1.0A running 3.5A inrush
Currents (Fan) 0.02A to 0.5A running, 2.5A inrush
Sensor Element Thermistor
Ambient Temperature Range (F) 30 F to 110 F
Ambient Temperature Range (C) 4 C to 43 C
Operating Humidity Range (% RH) 5 to 90% RH, non-condensing
Includes Logo insert pocket
Replaces Part Numbers: