Robertshaw Universal Thermocouple Gas Valve can be use on Natural Gas or L.P Gas Furnaces.
OPTIONAL PARTS LOCATED @ BOTTOM OF THIS PAGE
This New Upgraded Gas Valve 7200 Series can be used on most all older models of furnaces that use a Thermocouple are 24 volts.
Replaces Older Model Carrier, Essex Gas Valves:58DS125-1, 58DS100-2.
This Robertshaw Gas Valve is used on many Coleman and Intertherm MOBILE HOME FURNACES.
This Robertshaw Gas Valve is designed for a step opening to allow a very smooth lighting of main burners.
This Gas Valve also has side taps if needed for some Coleman Furnaces and comes with (1) 1/2" x 3/8" reducing busning if needed.
In some Mobile Home Furnaces this Gas Valve sits on a metal bracket with two screws that are attached to the Bottom of the gas valve.
When Replaceing the exist gas valve with this new gas valve you may need to drill new mounting screw holes into the existing bracket to line up with the mounting holes on the
bottom of the new gas valve.
GAS VALVE OPERATION:Ignition of Gas Pressure starts at about 25% and within 30 seconds the gas valve is running at 100% of gas flow for very quiet operation of burners.
Replaces Obsolete Gas Valve Part Numbers:
REPLACES HONEYWELL, WHITE RODGERS OBSOLETE GAS VALVES:VR8200C1108, VR8300C4100.
Robertshaw dual valve control is Designed for 24 Volt constant pilot applications.
Mounts in any position, except upside down.
Convertible pressure regulator for mobile home use.
Slow Opening Convertible from 25% to full flow within 30 seconds.
Meets all ANSI standards.
Pipe Inlet Size:1/2".
Pipe Outlet Size:1/2".
Optional side taps for some Mobile Home applications.
Specifications: Dimensions: 4-3/4" H x 2-29/32" D x 4-1/8" W.
Ambient temp.: -40F to +175F.
Capacity upto:150,000 BtuH.
Natural Gas Pressure:(at 3.5" W.C.).
Pressure rating: 1/2 PSI maximum.
NEC: class 2 Power consumption: 5 watts Swing radius: 3-9/16" Six-function valves incorporate manual valve, safety shut-off magnet, dual
automatic valves, main gas regulator and pilot adjustments. Features integral manual selector with four gas flow positions: OFF, ON, PILOT,
SET provides pilot-only gas flow during magnet energizing and lockup.
* Replaces Obsolete Robertshaw Mobile Home Gas Valves
This New Upgraded Gas Valve does not look any thing like the 30 year old Gas Valve but it is designed to take its place.
Can be used to Replace Obsolete Gas Valve Part Numbers:
Used in Coleman Furnace Models:Coleman Presidential III furnace:7956856, 7970C856, 7956-856, 7956B856, DGRT056AAA, 7670B, 7956C856, DGRT070AAA, DGRT075AAA.
Used in Coleman Evcon Intertherm Nordyne and many other Furnace Models: