Accredited Business Go Daddy Authorize.net
Click Here to Learn More
(866) 432-8551 Toll Free
Mon to Fri 10am to 6:30pm EST
Confused? Get help finding the right part

Rollover image above to zoom

1/100 H.P. 1680 RPM 115 Volt Factory Replacement VENTILAIRE Kit *Includes Motor, Fan Blade & Bracket

Price: $297.55 
Excl. Shipping
In-Stock
SKU: MOT914764A
(See Product Details Below for Manufacturers Part Numbers)
Quantity:
Discount Shipping

Our volume UPS discounts are passed-on directly to you for the lowest possible shipping rates.

1/100 H.P. 1680 RPM 115 Volt Factory Replacement VENTILAIRE Kit *Includes Motor, Fan Blade & Bracket* (Nordyne)



Product Specifications:

Includes Motor:Yes

H.P.: 1/100

RPM: 1680

Voltage: 115

Includes Bracket

Includes Fan Blade



Replaces Part Numbers:

71731651
914229
CAR914764




INSTALLATION INSTRUCTIONS:



These instructions are primarily intended to assist qualified individuals experienced in the proper installation of heating
and/or air conditioning appliances. Some local codes require licensed installation/service personnel for this type of
equipment. All installations must be in accordance with these instructions and with all applicable national and local codes
and standards.



Before beginning the installation, read these instructions thoroughly and follow all warnings and cautions in the
instructions and on the unit.



NOTICE TO INSTALLER

To avoid injury from moving parts, disconnect the power
to the ventilator system at the electrical panel before
servicing.



INSTALLATION

(For VentilAire II Models)

1. Disconnect power at the circuit breaker if the ventilator
system branch circuit is known or disconnect the main
switch before servicing.

2. Locate and remove the three screws atop the 12-inch
diameter cap. Set the three screws aside for later use.
Keep the nameplate to be re-installed later.

3. Discard the cap. Carefully remove the fan blade from
old motor assembly and discard.

4. Cut old motor leads (2) close to motor, leaving as
much wire as possible. Leave old motor in assembly.

5. Strip old motor leads 1/2" from ends and secure to the
new motor leads using the supplied wire nuts.

6. Install new motor assembly. Align old and new motor
mounting brackets when installing cap assembly for
maximum air flow and ensure wires do not interfere
with fan operation.

7. Secure new fan assembly with the three screws
removed in Step #2.

8. Turn the power back on.



(For VentilAire IV Models)

1. Disconnect power at the circuit breaker if the ventilator
system branch circuit is known or disconnect the main
switch before servicing.

2. Locate and remove the three screws atop the 12-inch
diameter cap. Set the three screws aside for later use.
Keep the nameplate to be re-installed later.

3. Carefully lift the fan power unit from the ventilator
system far enough to reach the incoming field wiring
two-pin connector. Disconnect the connector and
remove the assembly.

4. Cut old motor leads (2) close to the motor housing
leaving as much wire as possible. Seperate the wiring
control box from the old motor assembly by squeezing
the sides of the control box near the retainer tabs.

5. Strip old motor leads approximately 1/2" from ends
and secure to the new motor leads using the supplied
wire nuts. Attach control box to new motor assembly
taking care to engage the retainer tabs into the slots in
the new motor assembly.

6. Secure motor assembly and original rating plate with
the three screws removed in Step #2.

7. Turn the power back on.



NOTE: ENSURE ALL WIRE LEADS ARE TO ONE SIDE
OF BOTH MOTOR MOUNTING BRACKETS SO ALL
WIRING IS BELOW AND FREE OF FAN WHEN LOWERING
BACK INTO VENTILATOR SYSTEM.









I called trying to find out what happened to the rest of my order and was surprised to hear a warm and kind voice willing to do whatever it takes to find answers and follow through with her promise. Amanda is an asset worth holding on to and a credit to your company. She was very professional, helpful and courteous while assisting me with my order. I would most definitely assign her an A+ in customer service."
Donald "Brad" Thomas

I would like to thank you for your hard work in getting us our part in a timely fashion. You were very helpful and you understood the severity of the situation and did a wonderful job in getting the part to us. Thanks again and please share this with your boss! You were outstanding!"
Todd Mills

Share This:
Quantity:
In-Stock
Have Questions? Prefer to order by phone?
Our parts Experts are happy to help!

Call Monday to Friday 10am - 6:30pm EST
1-866-432-8551 or Email our Parts Experts
Accredited BusinessGo DaddyAuthorize.net
Amanda I want to thank you, the blower fan work perfectly. Thank you so very much."
Bill K Roberts
Amanda, Thank you very much again, I have been looking for this part for about two weeks and getting very frustrated in the process of the search, you were very helpful!!"
Ken Holm
Why Buy From Us?
110% Lowest Price Guarantee
Over 500,000 Parts in Stock
Same Day Shipping on Orders Received Before 3pm EST (Mon-Fri)
Nationwide Distribution Centers for Fast Delivery
Choose from UPS Next-Day, 2-Day, 3-Day and Ground Service
We Supply Retail and Wholesale
Order from us.
Risk Free, with
Our Triple Guarantee
Guarantee 1
No hassle, 30-day returns policy
Guarantee 2
110% Lowest price guarantee
Guarantee 3
90-day warranty
Sign up for Special Offers Directly from AmericanHVACParts.com
AmericanHVACParts.com | 548 N. 13th Ave., Suite 302 | Upland, CA 91786
© 2005-2014 AmericanHVACParts.com. All Rights Reserved.