Manufacturer: Johnson Controls |
|
Johnson Controls Damper Replaces Obsolete Honeywell D896 Automatic Vent Damper.
WIRING HARNESS INCLUDED!
For use with atmospheric type, gas-fired equipment to reduce home heating losses by closing off the vent between cycles.
Visual indicator shows damper position.
Wiring harnesses available separately to fit a variety of applications.
For use only on atmospheric type, gas-fired furnaces and boilers equipped with draft hoods.
Includes wiring harness on select models to fit 4-wire plug receptacle on S86/S8600/S8610/S8620 or Penn Baso G60 or G66.
Applicable to direct spark ignition (DSI), intermittent pilot (IP), hot surface ignition (HSI), and standing pilot systems.
Requires dual automatic combination gas control valve or two separate single function main gas valves.
Interlock switch provides safe operation; burner fires only with damper in open position.
Quiet motor and relay.
Product Specifications
Damper Size (in.) 6 in.
Damper Size (mm) 102 mm
Electrical Connections Four-wire plug receptacle
Electrical Ratings (power supply) 24 Vac
Operating Times (min. closing) 15 Seconds
Operating Times (min. opening) 30 Seconds
Temperature Ratings (ambient)(C) 0 C to 66 C
Temperature Ratings (ambient)(F) 32 F to 150 F
Frequency (Hz) 60 Hz
Approvals, Canadian Standards Association Design Certified: File No. 1029AVD-9081
Includes 8 ft (2.4m), 4-wire cable with mating plug for D896 on one end and mating plug for S86/S8600/S8610/S8620 or Penn Baso G60 or G66 plug receptacle on the other. Both ends equipped with outlet box connector.
Max. Appliance Input 27,842 W, 95,000 Btuh
Temperature Ratings (max. furnace stack)(C) 302 C
Temperature Ratings (max. furnace stack)(F) 575 F
Description 4 in. vent pipe
Unit of Measure: 1
Manufacturer: Johnson Controls
Replaces Obsolete Part Numbers:
D896A1277, CARD896A1277,
DAMP896A1186, Q35RA-1, M896A1012 GVD-4PL D896A1186A D896A1186, D896A1186A, CAR1H807, CARGVD4PL, CARQ35RA1
Replaces Part Numbers: 46487101, CAR46487101