Honeywell thermostat is used to control the ambient air temperature or floor temperature in hydronic heating application.
It communicates with and draws power from the AQ2000 series boiler and zoning controller to provide zoning control.
• 2-wire power stealing network communicating thermostat.
• Liquid Crystal Display.
• Outdoor temperature display.
• Floor temperature sensing and limit.
• Selectable temporary and permanent backlight.
Description The AQ1000TN2 thermostat is used to control the ambient air temperature or floor temperature in hydronic heating application. It communicates with and draws power from the AQ2000 series boiler and zoning controller to provide zoning control.
Application Hydronic Zoning Heat
Thermostat Type 2-wire Communicating Thermostat
Type of Control Provided: Proportional Integral (PI)
Network Zoning Yes
Network Bus Low voltage, Class II, 2-wire polarity-insensitive, digital communicating link to other Control or Zoning modules.
Zones Single or Multi-zone
Power Method Power Stealing (from boiler and/or zoning controller)
User Interface (Programming) LCD Display
User Interface (System Configuration) DIP Switches
LCD Icons Displayed (Mode): Heat On, Freeze Protection, Comfort/Unoccupied, Keypad Lock, Set point.
Color Premium White
Temperature Control Mode Selections "A" for Ambient Air, "F" for Floor, "AF" for Ambient & Floor.
Temperatures Displayed: Indoor, Set Point, Outdoor
Setting Temperature Range (F): 40 F to 100 F
Setting Temperature Range (C): 5 C to 38 C
Floor Temperature Limit Range (AF Model) (F): 40 F to 100 F
Floor Temperature Limit Range (AF Model) (C): 5 C to 38 C
Differential Temperature (F): +/- 1.0 degree F
Differential Temperature (C): +/- 0.5 degree C
Ambient Temperature Range (F): 32 F to 158 F
Ambient Temperature Range (C): 0 C to 70 C
Outdoor Temperature Display Range (F): -58 F to 149 F
Outdoor Temperature Display Range (C): -50C to 65 C
Temperature Display Interval (F): +/- 1.0 F
Temperature Display Interval (C): +/- 0.5 C
Storage Temperature Range (F): -20 F to 130 F
Storage Temperature Range (C): -30 C to 55 C
Operating Humidity Range (% RH) 5 to 90% RH, non-condensing
Sensor Element Thermistor
Sensors (Floor) Used 10 kilohm NTC thermistor at 25 C (77 F) +/- 0.5F (+/-0.3C) up to 500 ft (150 M) using 18 AWG or larger wire, beta=3892. Lead Length: 10 ft. (3050 mm).
Floor Sensor Temperature Rating (F) -58F to 230F
Floor Sensor Temperature Rating (C) -50C to 110C
Electrical Connections Wire-clamp screw terminals
Terminal Designations TH, TH, Sensor, Sensor
Dimensions (in.) 2.8 in wide x 4.6 in high x 1.0 in deep
Dimensions (mm) 7 cm wide x 12 cm in high x 2.5 cm deep
Device Weight (lbs) 0.2 lb.
Device Weight (kg) 0.1 kg.
Replaces Thermostat Part Numbers: