Pressure Reducing Valve for Single Pressure Systems, consists of a PP901A Valve, a sub-micron filter station, 2 psig gages, Interconnecting Pipe Fittings, and a Mounting Bracket (Honeywell)
Used to control the pressure of the air delivered to pneumatic control systems. Models available for single-pressure systems or two-pressure systems (Day/Night or Summer/Winter) requiring two independently regulated pressure settings. Dual-pressure units switch from the lower settings to the higher settings when main air is applied to the pilot port. Models also available including a sub-micron filter assembly and pressure gauges. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman and older Honeywell pressure reducing valves.
• Built-in adjustable safety relief valve for limiting downstream pressure.
• For two-pressure models: Pressure changes accomplished with manual switch or automatically with electric pneumatic switch.
• Adjustable stops for desired settings.
Description Pressure Reducing Valve for Single Pressure Systems, consists of a PP901A Valve, a sub-micron filter station, 2 psig gages, Interconnecting Pipe Fittings, and a Mounting Bracket
Output Pressure Range (psi) primary pressure: adj.0 to 25 psi
Output Pressure Range (kPa) primary pressure: adj.0 to 172 kPa.
Connection Size (in.) Inlet and out air: 1/4 in. NPT (female); 1/8 in.NPT pilot
Mounting Bracket furnished
Dimensions (in.) 11 in. high, 8 7/8 in. wide, 3 3/4 in. deep
Dimensions (mm) 279 mm high, 225 mm wide, 95 mm deep
Includes Submicron filter assembly and two psig gages.
Inlet Pressure Range (psi) 45 to 150 psi
Inlet Pressure Range (kPa) 310 to 1034 kPa
Replaces Part Numbers: