Manufacturer: Johnson Controls
Description: TRANS.0-50 PSI PNEUM.
Category: Pneumatic Controls
Sub Category: Transmitters
Pneumatic Pressure Transmitter
The P-5210 Pressure
Transmitter is designed to
measure a pressure, convert the
measurement into a proportional
3 to 15 PSIG (21 to 105 kPa)
output signal, and transmit the
signal through air pressure
piping to a pneumatic receiver
controller or indicator.
Pneumatic feedback and a ball
type control port are
incorporated to provide an exact
between the measured pressure
and the transmitted signal.
The P-5210 is a low volume
output device used with an
external .007 in. restrictor. The
supply/output signal connection
is at the top of the unit, and the
measured pressure connection
is at the bottom. All models are
furnished with a hypodermic
needle test point on the air
connection to facilitate checking
the transmitter output pressure.
Replaces Part Numbers: P-5210-1004, CARP-5210-1004