Manufacturer: Johnson Controls |
|
Description: REC.CTRLLR,DUAL INPUT,PROP+INT
Category: Pneumatic Controls
Sub Category: Receiver Controllers
T-5800-3 and T-5800-4
Dual Input Receiver-Controllers
The T-5800 Series Receiver-
Controllers are designed for use
with remote temperature, humidity,
or pressure transmitters
(connected to the controlled
variable “CV” input) to provide
precise control of pneumatic
devices. The T-5800-3 is a dual
input proportional-only receivercontroller
with field selectable
local or remote set point. The
T-5800-4 is also a dual input
receiver-controller with field
selectable local or remote set
point; however, this model
provides proportional plus integral
(PI) control. In addition, an
automatic/manual integral control
cutout feature is incorporated into
the T-5800-4 design. Utilizing the
fan “F” connection, this feature
allows the system to start up using
proportional-only control thus
keeping the system from going out
of control on startup, as is inherent
to PI (automatic reset) controllers,
when the system has been off for
some time. Refer to Product Data
T-5800 for instrument
specifications and additional
details.
Installation
The T-5800 Series Receiver-
Controllers are designed for
surface mounting; refer to Fig. 3
for space requirements and
mounting details. All air line
connections are made to the units
through two snap-on input/output
connectors which have barbed
fittings for 1/4 in. O.D. polytubing.
Both dual input models are
furnished with a clear cover, snapon
air connectors, a double
.007 in. orifice jumper, an
additional set point dial sticker
marked with 50 graduations, and a
yellow remote indication set point
dial sticker.
Replaces Part Numbers: T-5800-4, CART-5800-4