Honeywell Flame Quality Monitor
Overview
Honeywell Flame Quality Monitor (FQM) is designed to be used with any of the Honeywell Electronic Oil Primary Controls, such as the R7184A,B,P, or U by simply connecting the devices together with the communications cable supplied. When these two devices are installed as a system, the burner properly adjusted and the Flame Quality Monitor initialized, The FQM provides continuous monitoring of the flame and gives warning when the combustion process has changed from its original operational state. This warning normally occurs three to five days before the primary control would shut down on safety lockout after the FQM alarm. Depending on the specific cause of the warning, the actual time may be shorter or longer. Alarm contacts are unpowered and provided both normally open (NO) and normally closed (NC) contacts to match the alarm system, tank monitoring system or phone dialer to which the FQM is connected. Typically, the FQM is attached as a zone to the home security system or can be connected to a small alarm in the home. In either case, the person responsible for monitoring the alarm function is provided with directions on how to contact the appropriate oil service dealer so that service can be scheduled at a mutually convenient time.
Product Specifications
Dimensions (in.) 4 13/16 in. high x 4 3/16 in. wide x 1 9/32 in. deep
Dimensions (mm) 122 mm high x 108 mm wide x 33 mm deep
Temperature Range (F) -40 F to +150 F
Temperature Range (C) -40 C to +66 C
Used With Any of the Honeywell Electronic Oil Primary Controls, such as the R7184A,R7184AB,R7184AP, or R7184AU.
CARQS7100F1001