24 Vac Dual Standing Pilot Gas Valve with 1/2 in. x 1/2 in. inlet\outlet, step opening and Full Rate: 3.5 in. wc; Step Setting: 0.9 in. wc pressure regulator setting
Overview
Combination gas controls for use in 24 Vac, gas-fired, standing pilot appliances with capacities from 20 to 200 cfh.
.
Features
Controls include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
Compact size.
Provide two automatic valves.
Solenoid-operated first automatic valve opens on thermostat call for heat; closes when call for heat ends.
Diaphragm-operated second automatic valve opens under control of regulator; closes if gas or power supply is interrupted.
Meet codes requiring dual safety shutoff. Standard and slow opening natural gas models include natural to LP gas conversion kit; LP to natural gas conversion kit also available.
LITE-RITE (OFF-PILOT-ON) lighting sequence.
All adjustments, wiring connections and pilot outlet are accessible from top of control. Adjustable servo regulator effectively maintains almost constant gas output pressure under wide fluctuations in gas supply pressure.
Compatible with ECO connector.
Product Specifications
Type Single Stage
Ignition Type Standing Pilot
Type of Gas Natural
Inlet/Outlet Size (in.) 1/2 in. x 1/2 in.
Body Pattern Straight-through
Opening Characteristics (standard, step) Step Opening
Capacity @ 1 in. p.d. 130,000 BTU/hr; 20,000 BTU/hr minimum
Pressure Ratings (psi) 1/2 psi
Pressure Ratings (kPa) 3.5 kPa
Pressure Regulator Setting (psi) Full Rate: 3.5 in. wc; Step Setting: 0.9 in. wc
Pressure Regulator Setting (kPa) Full Rate: 0.87 kPa; Step Setting: 0.22 kPa
Pilot Gas Outlet Compression fitting for 1/4 in. OD tubing
Pressure Tapping 1/8 in. NPT with plug
Electrical Connections Combination screw and 1/4 in. male quick connects.
Electrical Ratings 24 Vac
Frequency 60 Hz
Anticipator Setting 0.5 A
Temperature Range (F) 0 F to 175 F
Temperature Range (C) -18 C to +79 C
Mounting 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
Dimensions (in.) 5 3/8 in. high x 4 1/16 in. wide x 2 11/16 in. deep
Dimensions (mm) 135 mm high x 104 mm wide x 69 mm deep
Approvals, American Gas Association IAS AGA Design Certified: File no. L2025006; CGA Design Certified: File no. L2025006; UL Component Recognized: File no. MH5323
Approvals, Underwriters Laboratories Inc UL Component Recognized: File no. MH5323
Used in Equipment Models:VR8200C 2213 9525 37, 465FX-R.
Used In Indiana, Burnham Gas Boiler Equipment Model Numbers:
PS-802-24VLWCOEZSMM
PS80224VLWCOEZSMM
Used in Williams Furnace Models:
465 FXR LPG
465FXRLPG.
Replaces Part Numbers:
VR8200C6008
81660182
VR8200C6024
VR8200C1041
CARVR8200C1041