and have joined forces!

Rollover image above to zoom

24 Volt Ignition Spark Module (White Rodgers)

Price: $123.73
Excl. Shipping
SKU: IGM59323
(See Product Details Below for Manufacturers Part Numbers)
Discount Shipping

Our volume UPS discounts are passed-on directly to you for the lowest possible shipping rates.

24 Volt Ignition Spark Module (White Rodgers)

The 5059 Pilot Relight Control is a low voltage control that
generates ignition sparks. It is energized by the thermostat
on a call for heat. Once flame is established, the
control senses the flame and stops sparking. If the pilot
flame is extinguished during a call for heat, the relight
control will begin sparking immediately upon sensing
absence of flame. The control delivers very low current
sparks (approximately 6,000 volts).

Pilot Relite Control, 1/4" Spade Terminals, 24V Input, 1/4" Spade Terminal High Voltage Connection


• Generates spark pulse until flame is sensed through spark electrode.

• Begins sparking immediately if flame extinguishes.

• Rugged solid state module design.


This control requires a connection to a dead metal
ground for proper control operation (mounting screws
provided accomplish this requirement). When used in a
grounded secondary circuit, T2 terminal must be connected
to ground.

Some furnace manufacturers paint their furnaces. If so,
the paint must be scraped from both sides of a furnace
where the grounded mounting hole (identified by a chassis
ground symbol on the 5059 pilot relight control) comes
in contact with the furnace wall (see figs. 1 and 2). To
ensure a positive equipment ground, make a final continuity
check between the control grounding hole and the
furnace using an ohmmeter.

Mount the control inside the furnace in a position so that
you have enough high voltage spark wire to reach the
electrode, but not to expose the control to excessive high
temperature conditions caused by the burner flame. The
5059 control can be mounted directly onto the furnace or
can be mounted on a standard 2
• x 4
• switch box.

The 5059 control has a 1⁄4
• male spade high voltage coil
connection. You must first install the rubber boot over the
wire, then strip about 3⁄8
• of insulation off the high voltage
wire and install a 1⁄4
• female spade connector (provided in
parts envelope) using a standard crimping tool

Replaces Part Numbers:


I called trying to find out what happened to the rest of my order and was surprised to hear a warm and kind voice willing to do whatever it takes to find answers and follow through with her promise. Amanda is an asset worth holding on to and a credit to your company. She was very professional, helpful and courteous while assisting me with my order. I would most definitely assign her an A+ in customer service."
Donald "Brad" Thomas

I would like to thank you for your hard work in getting us our part in a timely fashion. You were very helpful and you understood the severity of the situation and did a wonderful job in getting the part to us. Thanks again and please share this with your boss! You were outstanding!"
Todd Mills

Share This:
Have Questions?
Our parts Experts are happy to help!

Available Monday to Friday 10am - 6:30pm EST
Email our Parts Experts
Accredited BusinessGo
Amanda I want to thank you, the blower fan work perfectly. Thank you so very much."
Bill K Roberts
Amanda, Thank you very much again, I have been looking for this part for about two weeks and getting very frustrated in the process of the search, you were very helpful!!"
Ken Holm
Why Buy From Us?
110% Lowest Price Guarantee
Over 500,000 Parts in Stock
Same Day Shipping on Orders Received Before 3pm EST (Mon-Fri)
Nationwide Distribution Centers for Fast Delivery
Choose from UPS Next-Day, 2-Day, 3-Day and Ground Service
We Supply Retail and Wholesale
Order from us.
Risk Free, with
Our Triple Guarantee
Guarantee 1
No hassle, 30-day returns policy
Guarantee 2
110% Lowest price guarantee
Guarantee 3
90-day warranty
Sign up for Special Offers Directly from | 1042 N. Mountain Ave., #B546 | Upland, CA 91786
© 2003-2020 All Rights Reserved.