Rollover image above to zoom

16" Flexible Duct Class 1 Air Duct, Constructed of 2-layers of Polyester Film 100% Bonded Together.

Price: $136.59
Excl. Shipping
(See Product Details Below for Manufacturers Part Numbers)
Discount Shipping

Our volume UPS discounts are passed-on directly to you for the lowest possible shipping rates.

• Flexible Ducting 25 Feet Per Box.

Class 1 air duct, constructed of 2-layers of polyester film 100% bonded together.

Construction Features

25 Feet Fully encapsulated, galvanized steel wire sealed between two layers of tough polymer material.
Fully insulated with thick blanked of fiberglass insulation.
Polyethylene or metalized jacket externally applied.
25 feet Compression packaged for easy handling and storage.
Insulation value R-4.2


Installing flexible duct correctly helps ensure the duct system does its job, without adversely affecting system performance.

Installation Precautions

You should always opt for the minimum length of flexible duct. Any necessary bends should be made with not less than one duct diameter centerline radius. When you do bend the duct, it should extend a few inches beyond the end of a sheet metal connection before you bend it. When you're bending the duct, be careful not to compress it.

Proper Support

It's best to follow the manufacturer's instructions on how far apart duct supports can be, but in their absence, SMACNA says supports shouldn't be more that 5 ft. apart. The maximum sag the SMACNA standard calls for is 1
•2 in./ft. of spacing between the supports. You can consider the connection to other duct or to equipment as a support point.

Hanger or saddle material in contact with the flexible duct has to be wide enough so it doesn't reduce the internal diameter of the duct when the supported section rests on the hanger or saddle material.

The part of the hanger touching the duct should never be less than 1 in. wide. You can use narrower hanger material in conjunction with a sheet metal saddle that meets this specification. This saddle must cover one-half the circumference of the outside of the flexible duct and fit neatly around the lower half of the duct.

The standard allows factory installed supports that are integral to the duct, as long as the manufacturer's recommended installation procedures are followed. However you support the duct, make sure the supports are adequately attached to the structure.

To avoid tearing the duct's vapor barrier, don't support the entire weight of the flexible duct on any one hanger during installation. Avoid contacting the flexible duct with sharp edges of the hanger material. You can repair damage to the vapor barrier using an approved tape. If you penetrate the interior of the duct, you should either replace that section, or treat the torn area as a connection.

* Order Aluminum Foil Duct Tape Part Number: TPE3101.

* Order Duct Hanger Strap Part Number: DUC1120.

Any terminal devices you attach the flexible duct to should have their own support.

I called trying to find out what happened to the rest of my order and was surprised to hear a warm and kind voice willing to do whatever it takes to find answers and follow through with her promise. Amanda is an asset worth holding on to and a credit to your company. She was very professional, helpful and courteous while assisting me with my order. I would most definitely assign her an A+ in customer service."
Donald "Brad" Thomas

I would like to thank you for your hard work in getting us our part in a timely fashion. You were very helpful and you understood the severity of the situation and did a wonderful job in getting the part to us. Thanks again and please share this with your boss! You were outstanding!"
Todd Mills

Share This:
Have Questions?
Our parts Experts are happy to help!

Available Monday to Friday 10am - 6:30pm EST
Email our Parts Experts
Accredited BusinessGo
Amanda I want to thank you, the blower fan work perfectly. Thank you so very much."
Bill K Roberts
Amanda, Thank you very much again, I have been looking for this part for about two weeks and getting very frustrated in the process of the search, you were very helpful!!"
Ken Holm
Why Buy From Us?
110% Lowest Price Guarantee
Over 500,000 Parts in Stock
Same Day Shipping on Orders Received Before 3pm EST (Mon-Fri)
Nationwide Distribution Centers for Fast Delivery
Choose from UPS Next-Day, 2-Day, 3-Day and Ground Service
We Supply Retail and Wholesale
Order from us.
Risk Free, with
Our Triple Guarantee
Guarantee 1
No hassle, 30-day returns policy
Guarantee 2
110% Lowest price guarantee
Guarantee 3
90-day warranty
Sign up for Special Offers Directly from | 1042 N. Mountain Ave., #B546 | Upland, CA 91786
© 2003-2018 All Rights Reserved.